Steel belt applications, Laminate forming, Sheet forming, Suction

Steel belt applications

Laminate forming

Application Laminate forming Belt type DW type: DYMCO Welded endless steel belt Belt Model No. DW1884 Details Upper and lower steel belts sandwich and laminate the workpiece. The belts pass thru the heating zone with heater. The belt is usually thick for this application.

Sheet forming and crushing

Application Sheet forming and crushing Belt type DW type: DYMCO Welded endless steel belt Belt Model No. DW1884 Details The heated resin is cooled between two steel belts and becomes solid. When the resin sheet is fed out of the belts, it is crushed to be flakes.

Suction

Application Vacuum Belt type DP type: DYMCO perforated steel belt Belt Model No. DP1884 Details There are continuous holes on the belt. Workpieces are fixed and transported by vacuum through the perforation. Paper sheets, paper rolls and films are also fed on this vacuum belt.

Drying and heating

Application Drying and heating Belt type DW type: DYMCO Welded endless steel belt Belt Model No. DW1884/ DR188S/ DW1774/ DR177S/ DWA1774/ DW1574 Details The belt is used in heating environment between 100 and 300 degrees centigrade, realizing continuous heating.

Film forming

Application Film forming Belt type DW type: DYMCO Welded endless steel belt Belt Model No. DW1884 Details A film is formed on the belt. A mirror finished steel belt makes efficient film forming and smoother film surface.

Bookend Transportation / Stable transportation

Application Bookend Transportation / Stable transportation Belt type DW type: DYMCO Welded endless steel belt Belt Model No. DW1884 and DW1574 Details Transportation by one base belt and two side ones. Objects on the belt are well protected.

Application examples

PET bottle conveyor	Large cooling conveyor
Heating conveyor	Spraying-panel conveyor
Wafer/PCB conveyor	Conveyor in clean room